| Class Name |
<Class name>
- Set by Manufacturer Catalog dialog when available. Represents database class name.
|
| End Condition 1 End Condition 2
|
<End_COND_xx>
- Set by Manufacturer Catalog dialog when available. Represents end conditions at each connect point.
|
| Facing |
<Alpha-numeric value>
- Displays flange mating surface face treatment.
|
| Flange | Diameter |
Positive <numeric value>
- Sets flange outside diameter for End1 and End2.
|
| Flange | Thickness |
Positive <numeric value>
- Sets flange outside diameter for End1 and End2.
|
| Gasket Diameter |
Positive <numeric value>
- Sets gasket outside diameter.
|
| Gasket Thickness |
Positive <numeric value>
|
| Plumbing Connection | Outer Diameter |
<numeric value>
- Sets pipe outside diameter for End1 and End2.
|
| Rating |
<Alpha-numeric value>
- Displays flange's primary pressure rating.
|
| Setback Distance |
<numeric value>
- Sets connect point offset at End2.
|
| Slip-on Diameter |
Positive <numeric value>
- Sets the outside diameter of the slip on portion of the component.
Maximum size restricted by Flange Diameter property. |
| Taper Diameter |
Positive <numeric value>
- Sets outside diameter of the tapered end.
Minimum size restricted by Inlet Outer Diameter property. |
| Tag |
<alpha-numeric characters>
- For Gasket fitting, sets tag value visible in output of drawing composition in dynamic view. Separate tag strings with a semi colon.
|
| Total Length |
Positive <numeric value>
- Sets distance between End1 and End2 of valve.
|
